It works!

I’m so happy. I’m sooo happy. After days of working on my new PC yesterday was the day where it was time to turn it on and see if it actually works. And it worked and still works. I mentioned previously that I had some serious problems with the water block that might additionally have caused a short-circuit on the system, but I was able to solve it.

I was expecting a children’s disease here and there while setting up the whole system, but it wasn’t the huge hurdle I was expecting. I had some tiny problems with the RAM. With completely full stacked RAM slots and without X.M.P. enabled the motherboard simply wouldn’t start and was caught in a boot loop. There was one system freeze on the very first installment of Windows 7, which could finally be solved by updating to a newer BIOS version. ISRT is not working at the moment. When I go by and enable RAID XHD the system denies to boot. It is not even able to boot a Windows 7 DVD or anything else. I’m pretty sure that this is just a BIOS related issue that is going to be fixed by Gigabyte within the next couple of weeks.

As you may know, I’m a benchmark addict and I just couldn’t hold to do a little 3D Mark 11 from the scratch. I gained around 6,600 points without any tweaks and tuning, which is around 700 points more than I my old system. Man, I’m so excited to finally overclock the CPU and even the graphics card. Till now the whole system is pretty basic. I spent a lot of time in doing some quick researches on drivers and utilities used on this board. ISRT was the only one that actually needed an update to give a software response. Anyhow, it’s not working in hardware so I decided to use this drive for ReadyBoost at the moment.

For the time being I’m going to restore my Steam library and install the most common program to get me back to track. I guess after get a little bit more into the whole infrastructure of the board and learning about its little bugs I’ll do a couple of benchmarks.

n3gative gaming rig mark II

After two years and barely a half, it’s time for something new. I’m speaking of the CPU working in my game system. It’s a good old Intel Q9550 overclocked at 3.8GHz. Actually I don’t really want to replace him, because it’s a totally fine CPU, but over the years came the issues. First of all, I had some serious problems with the RAM. I wasn’t able to clock any higher than 1000MHz without running into crashes and freezes. But this is more a board related things.

As the time passes by came a heat problem additionally. I found the optimum settings pretty fast for the CPU and it rarely got any warmer than 60°C at full speed with all cores maximum loaded. It now hits the 85°C mark pretty fast, mainly in games like “DiRT 3” or “Battlefield Bad Company 2”. It’s a unacceptable temperature for a water cooled system. Besides this issue the CPU turns out to be more unstable as it was before. I get a lot of freezes and crashes in several applications. This could have been something RAM related but it’s not.

 

To make a long story short. I decided to switch to the latest Sandy bridge chipset Z68 in combination with a strong Intel i7-2600K. I was looking for a 1366 board and CPU first, but it turned out to be too expensive. I mean, I want a powerful gaming rig with a little extra tuning and not a hi end rendering engine or whatever you might name. The Intel i7-2600K seems to be the right CPU, with enough horse powers at a very fair price. It’s getting bedded on a Gigabyte GA-Z68X-UD4-B3 and hopefully isn’t the BIOS too buggy.

As far as my experience goes, the first BIOS versions of a brand new board generation are almost crap and can be considered as beta. Even a manufacturer like Gigabyte puts out a lot of bug filled and barely finished products these days, but the technical specifications of this board look very promising. I’m very optimistic that we’re going to be good friends. Anyhow, I’m gonna miss my DFI board, it was kinda killer and stable as hell.

RAM – it’s going to be 16GB of it and for the very first time ever I’m going to put Corsair RAM into my rig. I decided to pick the Vengeance series which looks pretty awesome and they will fit perfectly well with the black colour of the board. Hopefully, everything’s getting here during this week so that I can “go live” as soon as possible.