Tag Archives: CPU

Barely finished… but almost

Posted on by
Reply

Normally, when I work on a PC and build it from the ground up, it takes like two hours to nearly half a day. Since I’ve started with rebuilding, cleaning, repairing and upgrading my gaming rig, six days have passed. The intention actually is to make it as good as possible. I don’t want no hidden rubbish areas in my chassis and most importantly no dust. Old builds of my PC always included weird cable constellations and packed cable  trees in narrow corner. I tried to avoid things like this in this very build.

It takes a lot – and I mean a looot of time – to get all things arranged as one can possibly can. The mainboard alone was put around 6 – 8 times in the chassis. Main problem with the board was the backplate that was using too much space and could cause short-circuits. I finally found a good solution using less space and definitely not responsible for eventually upcoming short-circuits.

Another point is, well, it’s this kind of fetish of mine. I always use to put as much components in my PCs as possible. My working rig is somehow different, but mostly every PC I own is always packed. And by saying packed, I mean packed.

As you may know, the PC uses water cooling. Until now you can only find a water block on the CPU and a couple of tubes wandering through the chassis. The water pump is already installed, too. This time I decided to put the pump a little differently inside to gain a little bit more space inside. Additionally did I put some foam around the pump to minimize vibrations going on to the frame of the chassis causing noises. I also have plenty of room to do some quick maintenances in the case of an incident.

My new graphics card is going to be delivered this day’s afternoon and I’ll probably go to finish this PC by today’s evening. I was very lucky to get a 64GB SSD pretty cheap that I’m able to use ISRT immediately. I hope that it’s going to work with an previously set up RAID0, the storage solution that I always use for my system- and games partitions.

Anyhow, I’m pretty excited and nervous today and hopefully everything is getting well. I haven’t been working on a PC for such a long time before I finally started it and hopefully it’s going to be a good harbringer.

n3gative gaming rig mark II

Posted on by
Reply

After two years and barely a half, it’s time for something new. I’m speaking of the CPU working in my game system. It’s a good old Intel Q9550 overclocked at 3.8GHz. Actually I don’t really want to replace him, because it’s a totally fine CPU, but over the years came the issues. First of all, I had some serious problems with the RAM. I wasn’t able to clock any higher than 1000MHz without running into crashes and freezes. But this is more a board related things.

As the time passes by came a heat problem additionally. I found the optimum settings pretty fast for the CPU and it rarely got any warmer than 60°C at full speed with all cores maximum loaded. It now hits the 85°C mark pretty fast, mainly in games like “DiRT 3” or “Battlefield Bad Company 2”. It’s a unacceptable temperature for a water cooled system. Besides this issue the CPU turns out to be more unstable as it was before. I get a lot of freezes and crashes in several applications. This could have been something RAM related but it’s not.

 

To make a long story short. I decided to switch to the latest Sandy bridge chipset Z68 in combination with a strong Intel i7-2600K. I was looking for a 1366 board and CPU first, but it turned out to be too expensive. I mean, I want a powerful gaming rig with a little extra tuning and not a hi end rendering engine or whatever you might name. The Intel i7-2600K seems to be the right CPU, with enough horse powers at a very fair price. It’s getting bedded on a Gigabyte GA-Z68X-UD4-B3 and hopefully isn’t the BIOS too buggy.

As far as my experience goes, the first BIOS versions of a brand new board generation are almost crap and can be considered as beta. Even a manufacturer like Gigabyte puts out a lot of bug filled and barely finished products these days, but the technical specifications of this board look very promising. I’m very optimistic that we’re going to be good friends. Anyhow, I’m gonna miss my DFI board, it was kinda killer and stable as hell.

RAM – it’s going to be 16GB of it and for the very first time ever I’m going to put Corsair RAM into my rig. I decided to pick the Vengeance series which looks pretty awesome and they will fit perfectly well with the black colour of the board. Hopefully, everything’s getting here during this week so that I can “go live” as soon as possible.